LED wall light and ceiling light Eterea by Icone
The Eterea lamp is reminiscent of a planet with a ring system. The large main plate acts as a reflector, directing the light into the room. It is available in diameters of 40, 60, or 80 cm. A 1 cm thick metal ring encircles the center of the plate, supporting a tiltable, oval diffuser equipped with an LED in either 2700 K or 3000 K. The LED is phase-cut dimmable (Triac). The main plate is available in butter white, and the ring, including the diffuser, is available in chocolate caramel, champagne, or glossy black. Three additional color combinations are available upon request.
Wood LED wall and ceiling lamp Eterea by Icone
This model is the wooden version of the Eterea wall and ceiling light by Icone. The main element is a wooden panel made of canaletto walnut, mounted on an aluminum support. The wooden panel is encircled by a 1 cm thick metal ring on which a tiltable, oval diffuser is attached, equipped with an LED light source in 2700 K or 3000 K. The LED is phase-cut dimmable (Triac).
The wooden panel is available in diameters of 40, 60, or 80 cm. The ring, including the diffuser, is available in the following colors: chocolate caramel, champagne, or glossy black. Three additional color combinations are available upon request.
Orientable LED wall and ceiling lamp Clips by Icone
Clips by Icone is a 360° orientable LED wall and ceiling light. The front of the lamp consists of a flat plate available with a mirror, a wood plate (canaletto walnut), or an aluminum plate in glossy red, glossy green, glossy black, or glossy butter white. The smaller model with a diameter of 33 cm also allows for adjustable depth, from 10 cm to a maximum of 13 cm.
The rear of the light consists of a dome-shaped polycarbonate cover equipped with an LED light source. The LED is available in 2700 k or 3000 k, and the model with a diameter of 33 cm has over 3500 lm, while the larger one with a diameter of 50 cm has over 6500 lm. The Clips light emits a soft and even light onto the wall and is used as an indirect light source in a room. The version with a mirror, for example, can be used not only as an indirect light source but also as a mirror in a small bathroom or hallway. The LED is phase-cut dimmable (Triac).
Ring-shaped LED table light Eterea by Icone
Matching the wall, ceiling, and pendant lights, the Eterea lighting series also includes a table lamp. It consists of a 1 cm thick metal ring, available in 60 cm or 80 cm diameters, supporting a flat, oval, tiltable plate equipped with an LED in either 2700 K (2850 lm) or 3000 K (2900 lm). The table lamp features a touch dimmer.
Available colors: all champagne, all glossy black, all chocolate caramel, or a movable LED plate and base in butter white with a metal ring in champagne or chocolate caramel.
Flexible LED wood wall lighting Vera by Icone
Icone has created a new wooden version of its popular Vera wall lamp. The canaletto walnut wood panel is mounted on an aluminum bracket that also serves as the wall mount. A movable and tiltable ring, available in white, black, satin brass, or satin aluminum, is attached to the wood panel. The flexibly adjustable ring is equipped with an LED in 2700 K or 3000 K. Available sizes in cm: Ø 21, Ø 26, and Ø 31.
The Vera wall lamp is phase-cut dimmable (Triac). DIM 1-10V/PUSH or DALI versions are also available upon request.
Elegant wooden ceiling and wall light Essenza D by Icone
This model from the Essenza lighting family consists of a round canaletto walnut wood panel mounted on an aluminum bracket. Two metal rods extend above the wood panel, serving not only as a decorative element but also diffusing indirect light into the room. It is equipped with two phase-cut (Triac) dimmable LED light sources, available in 2700 K or 3000 K. The metal rods are available in black, brushed bronze, and brushed iron.
LED wall light NoName AP1 by Icone
The NoName designer lamp by Icone is a piece by the designer Giulio Cappellini and is available in different designs and colors. The NoName AP1 model is the simplest version, made from a wall bracket including a driver, an oval ring measuring 30x54 cm and a ring holder. The ring is equipped with an LED light source of 2140 lm (2700 k) or 2200 lm (3000 k).
The indirectly lighting NoName AP1 wall lamp is available in the following colors: BI-White, NE-Black, OT-Satin brass, BI.OT-White/Satin brass and NE.OT-Black/Satin brass. In the two-tone models, only the ring holder is satin brass, the rest of the lamp is then in white or black.
The NoName AP1 wall lamp is also available as a built-in version on request.
LED wall lighting NoName AP2 by Icone
The NoName AP2 lamp is the double wall version of the NoName lamp family by Icone. Consisting of two indirectly illuminated rings and a wall bracket, the designer lamp is not only functional, but also a beautiful piece of furniture. The wall lamp has a total length of 81 cm and a width of 30 cm. Both rings together emit 3620 lm (2700 k) or 3730 lm (3000 k). The light shines directly onto the wall and then indirectly into the room.
The NoName AP2 wall lamp is available in the colors BI-White, NE-Black, OT-Satin brass, BI.OT-White/Satin brass and NE.OT-Black/Satin brass. In the two-tone models, only the ring bracket is satin brass, the rest of the lamp is then in white or black.
On request, the NoName AP2 wall light is also available as a built-in version.
LED glass hanging lamp Cristalglob by Icone
The pendant light Cristalglob by Icone consists of a few elements that together create a modern and unique light. What is special about the lamp is the blown glass, the surface of which is not smooth but has different grooves. The surface treatment creates a very special and harmonious light distribution.
The glass of the Cristalglob hanging light is available in two different sizes (Ø15 cm or Ø33 cm) and colors (transparent or rose). You can also choose the color of the glass holder + ceiling rosette: white or brass.
The Cristalglob hanging lamp is equipped with a dimmable (Triac) LED with 1394 lm for the small version and 2028 lm for the large version. LED light color 2700 k or 3000 k.
Important note: The hanging lamp is equipped with a ceiling rosette and transformer. On request round canopies are available for the lamp, on which several lamps can be mounted. The manufacturer offers canopies in white or brass for 4, 6, 10 or 14 lights.
Indirect wall and ceiling lighting Essenza by Icone
The Essenza designer lamp is suitable for indirect lighting and can be installed as a wall lamp or ceiling lamp. The lamp is available in different sizes, colors and LED light colors.
Essenza by Icone consists of a round reflector with two metal strips in the middle. The metal strips are fitted with the LED, available in 2700 k or 3000 k and emit a direct light onto the round disc, which then reflects the light into the room.
The Essenza wall and ceiling lamp is available in 4 different sizes: 30 cm, 47 cm, 70 cm and 90 cm. The lamp is also available in different colors (round disc/metal rods): gold powder/brushed bronze, gold powder/black, gold powder/white, white/white and white/black. Other colors are available on request (see images for color combinations).
LED wall and ceiling lamp Essenza D by Icone
Essenza is another lamp by Icone perfectly suited for indirect room lighting that not only spreads atmosphere, but is also an eye-catcher. Essenza D is suitable as a wall lamp and also as a ceiling lamp.
The lamp consists of two parts. On the one hand it consists of a round, thin disc that reflects the light into the room and on the other hand, two metal strips that are parallel to the disc and carry the LED light source (2700 k or 3000 k). The metal strips are not in the middle of the Essenza D, but on the sides above the reflector. The lamp can be mounted in any direction, thus changing the position of the metal strips on the lamp.
The Essenza D ceiling and wall lamp is available in 4 different sizes: Ø 30 cm, Ø 47 cm, Ø 70 cm and Ø 90 cm. The lamp is also available in different colors (round disc/metal rods): gold powder/brushed bronze, gold powder/black, gold powder/white, white/white and white/black. Other colors are available on request (see images for color combinations).
LED wall light and ceiling light Masai 90 by Icone
Masai 90 is an oval LED lamp suitable as a ceiling and wall lamp. The lamp spreads an indirect light in the room. The main feature of the Masai 90 lamp is a large oval plate measuring 60x90 cm on which two smaller oval plates are fixed. The two small discs are each equipped with a 20 W and 1910 lm LED and spread 3820 lm together. The light sources cannot be seen because they are on the back of the two small panes. The light is beamed directly onto the large disc above, which then reflects into the room.
The Masai 90 ceiling lamp and wall lamp is available in the following color versions (large disc/small disc): white/white, white/brushed bronze, white/black, gold powder/bronze brushed, gold powder/white, gold powder/black. Furthermore, you can choose the lamp with the LED light color 2700 k or 3000 k.
LED ceiling light and wall light Masai by Icone
Icone has more flexible wall and ceiling lights in its range with the Masai light series. Just like the Vera and Petra models, the Masai 50 and Masai 70 consist of a large main plate and a small disc.
The oval main disc is available in the sizes 50x36cm and 70x44cm. Fixed to the main plate is a smaller oval disc that can be rotated and is fitted with the LED ring on the backside. The 1350lm LED spreads a direct light onto the large oval disc which then reflects the light into the room. You can choose between the light colors 2700k or 3000k.
The wall lamp or ceiling lamp can be selected in different colors with the large and the small oval plate having different colors. The following color combinations are possible (large disc/small disc): white/white, white/brushed bronze, white/black, gold powder/bronze brushed, gold powder/white, gold powder/black.
LED wall lamp Masai AP by Icone
Another model in the Masai series of lights is the Masai AP 15 and Masai AP 20 wall lights. Like the larger Masai ceiling/wall lights, the Masai AP has a fixed main plate on which a smaller, moveable plate is fixed. The small oval disc carries the LED module and emits a direct light onto the larger disc, which then reflects the light into the room.
Perfect for indirect room lighting in corridor, living rooms and bedrooms. The wall lamp Masai AP is available in different colors with the large and the small plate having different colors. The following color combinations are possible (large disc/small disc): white/white, white/brushed bronze, white/black, gold powder/bronze brushed, gold powder/white, gold powder/black.
LED wall lighting Masai AP P and G by Icone
The Masai AP P and Masai AP G models are both wall lights with an indirect LED light source. This means that the lights spread a direct light onto the wall, which then reflects the light into the room. The AP P has a size of 14x25 cm and a 1911 lm (2700 k) LED, while the AP G has a size of 18x36 cm and a 2100 lm (2700 k) LED. Both models can be chosen with a 2700 k or 3000 k LED. Masai AP P and Masai AP G are available in the following colors: white and black.
LED ceiling light Hula Hoop P2 by Icone
Hula Hoop P2 is a playful ceiling lamp that brings a lot of indirect light into a room. The main feature of the lamp is a large plate with a diameter of 66 cm, on which a fixed aluminum rod is attached in the middle. Two rings of different sizes are fixed to the rod, each equipped with an LED ring. The LEDs spread a direct light upwards onto the panel, the so-called reflector, and then reflect the light downwards into the room. The rings can be tilted slightly to adjust the beam angle.
The Hula Hoop P2 ceiling light spreads a total of 5320 lm (2700 k). Furthermore, the lamp is available in different colors, whereby the large plate and the small rings can have different colors. Colors available are (big plate/small rings): white/white, gold leaf/black, gold leaf/white and white/brass.
LED ceiling lamp Hula Hoop P3 by Icone
Hula Hoop is a modern and playful family of lights by Icone that not only spread indirect light, but are also a designer piece in a room.
The Hula Hoop P3 model consists of a large reflector with a diameter of 75 cm on which a thin aluminum rod is mounted in the middle. There are three rings of different sizes on the rod itself, each is equipped with an dimmable LED. The ceiling light spreads a total of 7060 lm with a light color of 2700 k. The Hula Hoop lamp is available in the following colors: white/white, gold leaf/black, gold leaf/white, white/brass.
LED ceiling and wall lamp VERA by Icone
Vera 66 and Vera 50 are the two larger models in Icone's Vera lighting family. This wall and ceiling lamp consists of a large, round plate with a smaller LED ring in the center. The 360° rotatable ring features an LED available in 2700 K or 3000 K, is dimmable (phase-cut Triac), and directs light onto the large plate. The lamp is available in 10 different color combinations and two sizes: Ø 50 cm and Ø 66 cm.
To request available in 1-10V/push or DALI dimmable version.
LED wall and ceiling lamp VERA by Icone
The Vera aluminum light by Icone consists of a circular base on which the LED light source is mounted - a ring that can be individually rotated 360° and tilted 90°. The adjustable ring features a high-quality, bright LED in either 2700 K or 3000 K. Vera can be mounted as a ceiling or wall light. It is available in three different sizes: Ø 21 cm, Ø 26 cm, and Ø 31 cm. Ten color combinations are available, dimmable phase-cut (Triac).
Upon request, the Vera light can be ordered with 1-10V/Push or DALI control and in other color combinations.
KIT 400 for ceiling and wall lamp Petra 40, 50 and 66 by Icone
KIT 400 is a hanging spot consisting of a 4 m long black cable and a diffuser equipped with a LED to 1404 lm (2700 k) or 1440 lm (3000 k). Thanks to this accessory, it is possible to turn the ceiling light Petra into a ceiling and pendant lamp. The Petra 40 can be equipped with max. 2 hanging spot, the Petra 50 with max. 3 and the Petra 66 with max. 4.
Important: the ceiling and wall lamp Petra is not included in the price and must be ordered separately.
LED ceiling and wall lamp PETRA by Icone
The ceiling lamp Petra, also suitable as a wall lamp, is another model of a versatile and special lighting family of Icone. The lamp consists of two square plates, both available in different colors. The larger of the two plates is fixed and the under plate, equipped with the LED module, can be rotated arbitrarily. The small square disc radiates the light onto the larger disc, which then distributes it again into the room.
Thanks to the different color variants, the lamp looks either modern and simple or noble and rustic. Thus, the ideal ceiling light and wall light for every furnishing handle. The lamp is available in the dimensions 43x43 cm (1739 lm), 50x50 cm (2125 lm) and 66x66 cm (3196 lm). The ceiling light is phase-cut dimmable; dimmable 1-10/PUSH and DALI versions are also available on request.
A lamp more possibilities
The special feature of this model is that the ceiling and wall light can be equipped with suspended spots and thus not only serves as an indirect light for the ceiling or the wall, but can also be used to illuminate counters, dining tables, bedside tables and much more.
Available is a hanging spot "KIT 400" equipped with a LED at 1404 lm, dimmable Phase cut. The cable length of the hanging spot is 4m. The Petra 40 can be equipped with max. 2 hanging spots, the Petra 50 with max. 3 and the Petra 66 with max. 4.
Important: The hanging spot KIT 400 is not included in the price and must be ordered separately.
LED designer table light LUÀ L by Icone
Luà L is the matching table lamp from the LUÀ series by Icone. The table lamp is also equipped with a flexible 6 mm thick aluminum disc and a COB LED. The movable disc is mounted on a solid base.
Available in two sizes and various colors. Both lights are equipped with the same LED and emit direct downward light with 2293 lm (2700 K) or 2352 lm (3000 K). The light is dimmable.
LED designer suspension light LUÀ 2C by Icone
The lamps series Luà by Icone is available as pendant lamp, table lamp, floor lamp and wall lamp. All are equipped with a movable diffuser, made of a 6 mm thick aluminum disc.
The Luà 2C pendant luminaire is equipped with two movable discs unlike the other models. Both carry a high-quality COB LED module to 2700 k (4060 lm) or 3000 k (4320 lm). The lamp is available in different colors and dimmable phase-cut (Triac).
LED suspension lamp LUÀ 60C by Icone
The Luà 60C hanging lamp by Icone consists of a round 6 mm thick aluminum disc. This disc is equipped with 3 high-quality COB LED module to 5896 lm (2700 k) and 6480 lm (3000 k) and can be tilted as desired. Since the diffuser can be tilted, it is possible to change the light emission and adapt it to the conditions. The pendant lamp Luà is available in 5 different colors.
In addition to the pendant lamp Luà is still a table lamp, a floor lamp and a matching wall lamp available.
€1,111.21*
instead of
€1,145.58*3%
Delivery time 15 working days
This website uses cookies to ensure the best experience possible. More information...